Pneumatic little press New Gep

Suitable through interchangeable dies for the manual application of eyelets, rivets, buttons and other kinds of nuts and bolts whose dimensions and resistance are higher than standard.
In particular, this machine is equipped with an optical pointer and an item retention system with venturi vacuum system.

The machine has a sturdy and compact body made of carbon steel. It is able to withstand a considerable pressure (max. thrust 900/1000 KG.); pressure is exerted by a cylinder Ø 63 through a toggle-levarage; the machine can be secured on any suitable support such as (work bench, in-line installation, etc.); space adjustment through the adjusting screw placed on the lower arm; lower arm can be adjusted according to work requirements; the machine can be equipped also with an eyelets/rivets automatic feeder customized; in compliance with the accident prevention regulations in force the machine is supplied with full fairing and provided with shun-space; available with low or high table.
Support completely made of pressure bent sheet metal, epoxy dust paint; provided with four rubber shock absorbing feet, one of them is adjustable.

Height: mm 1480/1660
Width: mm 550
Depth: mm 660

Work depth: mm 180
Max thrust (at 6 bar): Kg 950
Weight: Kg 60
Absorption approximate value: Lt 150 (at 100 strokes to the minute)
Height from ground to work level: m 900/1050
Working pressure: bar 4 - 6

Fields of application

Related accessories

KAU : possibility to make the machines aspirants by means of a kit to vacuum generator sucks the rivet on the upper die

Watch the video

Request more info

Your name (*)

Company name (*)

Address (*)

Field

Your email (*)

Phone number (*)

Nation

Subject

Your message

The fields marked with the symbol (*) are required for sending the message

I agree to the Privacy Policy and the EU Reg. 2016/679 YES
For more information read PRIVACY POLICY

"]

TOP